Question Similar RAM in Mobo QVL but not quite what I have ?

[fedefrasis]

Hello. Im am bulding two pcs on the X670e-e Gaming wifi and x870e-e Gaming wifi mobos, both by asus, with a 9800x3d and 9950x3d respectively

I have two sets of 64gb ddr5 rams CMK64GX5M2B6000Z30 by Corsair that i got for these rigs

Problem is, QVL for both motherboards lists a close CMK64GX5M2B6000Z28(Ver 5.43.01) but not mine which is the z30 / cl30
Is this due to them not testing every variant and mine will work or do i specifically needed to have bought that SKU z28?

there is a z30 corsair 2x32 6000 listed but its a different kind of ram with rgb and higher heatsinks


Will these ram kits work with my mobos for the rigs im making? I plan to just turn on expo and leave it
Thanks

 

[Eximo]

Has EXPO support, should work fine.

 

[fedefrasis]

Has EXPO support, should work fine.

Wait, so if the memory has expo, thats it? it works?

 

[Eximo]

Wait, so if the memory has expo, thats it? it works?

No, but it is a near certainty. Memory with profiles for AMD chips. And the memory controller is on the CPU and not the motherboard.

Worst case, you can call up Corsair and I am sure they would swap them out if they didn't work in your systems.

 

[fedefrasis]

No, but it is a near certainty. Memory with profiles for AMD chips. And the memory controller is on the CPU and not the motherboard.

Worst case, you can call up Corsair and I am sure they would swap them out if they didn't work in your systems.

im in argentina, there is no official support. if it doesnt work id probably have to sell them and get another kit. how can i know it works? if it boots, im good?

 

[Eximo]

Corsair has a presence in Argentina. As long as you buy from an authorized seller, and they have a lot that must ship to there if not within the country.

Where to buy

Corsair

www.corsair.com

Booting is a good start. Then setting EXPO. At that point you should run a memory test. MemTest86 is always good. But basic system stability while the memory is being utilized is decent test.

 

[geofelt]

Since you have the kits, try them.
If it boots,
Run
memtest86.

It does not use windows.

If it runs a full test with NO errors, you are likely OK.

To be sure, run a couple more times.